For interstate and overseas makers

Your install and service crew in WA.

You sell machines or automated systems into Western Australia, and your engineers are on the other side of the country or the world. We install, wire and commission your equipment alongside them, then service it afterwards and report it your way.

What you send us
  • The scope, drawings and your wiring diagrams
  • Your inspection and test plan, and your report template
  • The site, the builder contact and the date it lands

We take it from there, and you hear from us when it's in, tested and documented.

What we do

Your equipment, installed and looked after to your standard.

Install and wire

Panels mounted and wired, power and control cabling run to every device, terminated and labelled to your drawings.

Commission with your engineers

On site with your engineer, or with them dialled in remotely, so you don't have to fly someone over for every job.

Test and document

Insulation and continuity on every run, your inspection and test plan, as-built markups and the electrical safety certificate.

Service it afterwards

Defects-period visits and ongoing service, with function, fire and power-failure tests and battery load tests where they apply, reported on your own template.

How we run an install

Six steps, from the floor plans to the first service visit.

  1. 1Lock in panel locations early.We mark your panel layout up on the architectural plans, so the builder, fire and BMS contractors are all working from one set of locations.
  2. 2Install.Panels mounted and wired, cabling run to every device, terminated and labelled.
  3. 3Interfaces.Fire panel contacts and BMS gateways coordinated with the fire contractor, the BMS contractor and the builder.
  4. 4Commission with you.On site or remotely, against your commissioning sheets.
  5. 5Test and document.Your inspection and test plan, as-builts and the certificate, filed the way you want them.
  6. 6Look after it.Defects-period visits and scheduled service, reported on your template.
Who already uses us

Four makers, one Perth crew.

Automated louvres and smoke vents

EBSA

Control panels and cabling at ECU City Campus, Murdoch University and the WA Museum, commissioned with EBSA and serviced through the defects period on EBSA's own report.

Industrial fans, since 2013

Big Ass Fans

Installation and maintenance across WA, from the Perth metro out to Albany and Port Hedland.

Site access control

Irongate Solutions

Turnstiles and pedestrian gates wired to Irongate's diagrams and commissioned on construction sites across Perth, plus the hardware swaps and fault calls in between.

Materials handling

Lödige

Control panel for a powered roller deck at dnata's Perth Airport cargo facility, installed, tested and commissioned, and handed over with the certificate, schematic and completion report.

Free site check

Before your next WA job ships.

Tell us what's shipping and where it's going. We look at the site and tell you what it needs for power, cabling and access, so nothing holds the install up when it arrives. Free for viable jobs.

Response

Service calls attended within 48 hours and emergencies within 12 hours, business days, Perth metro.

Coverage

Perth metro at our standard rates. Regional WA by the kilometre, plus travel time.

Aftercare

An agreed rate card plus scheduled service visits, the way we look after Big Ass Fans and EBSA systems.

Get in touch

Shipping equipment into WA?

Tell us your company, what's shipping, the site suburb or town, and a rough date. We'll tell you what the site needs.